I will see you on the other side where the Sunshine is even brighter / Mom’s DIY Heaven sign

Mom’s DIY Nook

       Today I will show you how simple it is to paint your own sign. This is something anyone can do with a little practice. I have suggestions on product and tools you can use, however you will need to do some exploring yourself, to find the things that will work best for you. Now let’s have some fun!

fullsizeoutput_bc0.jpeg

Step One:

Pick out a some wood, this particular sign is 24’x12’x3′. I use recycled wood mostly, mainly because we own a fence company, and I got tired of seeing the left over wood end up in the burn pile. For this sign I use the 1”x4”x4” Gothic pickets, you can purchase from any home improvement store. If I were to buy, I would purchase from Lowe’s. You don’t have to cut your own wood if you don’t have a saw, Lowe’s will cut it for you. Feel free to use Pine, and not pickets. I like the aged look, that’s why I use the pickets.

First, I use pre cut 1”x2”, I cut them just a little bit shorter than 24”, this way you don’t need to cut the wood again, if you can see the wood after the sign is complete. I line the wood up best I can and put them approximately 6” apart, as you can see in my sample.

fullsizeoutput_bc8

I try and keep it close to this folding line in my table, it helps. You can use a board or a yard stick, anything with a straight line for a guide.

Step Two:

I lay down a generous layer of Elmer’s wood glue, any kind of wood glue will work, you will find what best works for you.

fullsizeoutput_bc3

Step Three:

I take my precut boards I cut from my fence pickets and start laying them on the glue. Again, you can omit steps 1-4, if you use pre cut pine 24”x12”x1”.

fullsizeoutput_bc5.jpeg

Over hang the first board on the glue, by doing this, the last board will over hang off the 1”x2” boards and the will not stick out on the top or bottom of the sign.

Step Four:

Now, you will need some kind of weight on the glued boards so it will stay in place and adhere better. I place a piece of 24”x2”x1” directly on top, this will distribute the weight evenly over the whole surface of the sign.

fullsizeoutput_bd8.jpeg

After this, I place some kind of weights on sign over the top of the pine board. I let it dry over night, 24 hours would be the best.

 

fullsizeoutput_bd7

Step Five:

This step I will prep the sign, you can use any color paint you want to, just keep in mind, the lettering colors, and make sure they are in contrast, so the sign will be easily read.

I always use flat acrylic paint. The stencil will be easier to hold, and keep in place while painting, with less sliding around. Gloss paint does not work as well. Again, you will discover what will work best for you.

fullsizeoutput_bc6

I start in the middle of the board and apply a generous amount from top to bottom. After that, I start to lightly feather the paint onto both sides of the sign. While feathering, paint with a very light hand, lifting the brush when you get towards the edge. By doing this it allows part of the wood to show through the paint, I prefer this, because the sign looks more weathered, and that’s the way I like some signs to look. You can paint solid, it will be your own preference.

 

fullsizeoutput_bc1.jpeg

After the feathering is done, you can go back a add more paint to the sign avoiding the edges. I need to do this because the wood I use is very porous and adding more paint somewhat smoothes the wood out.

Let the paint dry completely before you move onto step Six.

Step Six:

In this next step, you will chose the colors you want to make your sign. You will also gather your tools. Keep a cup of water close to put your paint soaked sponges and brushes in, do not let paint dry on your tools. If you let the paint dry on the tools, you will need to throw them away. I will use the same tools over and over, I wash everything immediately after I am finished. I always use a different color for the word, and the words, “Love and Heaven”, by doing this, the words stand out more.

I always lay my sign on a towel, this will help when you are blotting the paint on the stencil, and it will help with the sign rocking back and forth.

I chose my color, and paint. I like the chalk acrylic paint because it is very thick, and when I blot carefully, it will not bleed through the stencil.

I also use the sea foam sponges, I have found, by lots trial and error, and using other types of sponges, the sea foam sponge, works the best for me.

Also, another tip is to wear plastic gloves, stenciling is a very dirty job and if you do not use gloves, you will end up with paint all over your fingers and hands.

You will also need a paper plate, or something to dab, to remove excess paint.

fullsizeoutput_bd4.jpeg

Step Seven:

Now it’s time to position the stencil on the sign. I can just eyeball ball it. If you are more comfortable by measuring, by all means positing the stencil however you are comfortable with.

After you have the stencil positioned, it is time to start blotting the paint onto the sign.

fullsizeoutput_bca.jpeg

fullsizeoutput_bc4.jpeg

 

I shake the paint real well, and I leave a blob on the cap, I use the cap to get paint on my sponge, then, I blot my plate to get the excess of my sponge.

 

I will do a light coat, the whole time using my other hand to hold the stencil in place, this is very important, you don’t want a word to look, double versioned. You can sponge more color in, to your desired look after it dries a little bit. If you are more comfortable taping the stencil to the board, do so.

fullsizeoutput_bcc.jpeg

fullsizeoutput_bca

After you are done with the first color, put your sponge into the glass of water right away. It will make cleaning the sponge easier after is soaks in the water.

Time to start on your next color. Follow the same step, with a clean sponge, and get the second color on your sign.

 

fullsizeoutput_bc2

fullsizeoutput_bd5

fullsizeoutput_bcb.jpeg

Congratulations! You have completed your sign.

If you want to push your new talents, move onto step eight. I personalize all of my Heaven Signs, because I make them to order from our Etsy site, https://www.etsy.com/shop/LittleSuminSumin

Move onto step eight.

 

Step Eight:

I personalize these Heaven Signs because it help people who have lost loved one to pay tribute to them. These signs are a way of helping them to move on, but also keep their lost loved ones alive with a memorial.

I use the same color paint as the, “Heaven and Love”. I take a tiny paint brush and paint what the customer wants, you might want to do this on your new sign to remember a loved one you lost.

fullsizeoutput_bc9.jpeg

Thank you so much for your time, and I hope this helps. please feel free to ask any questions, make any requests of something you might want to learn. We are here to help each other and most importantly, learn from each other!

 

Also, Look us up on FB “LittleSuminSumin”, and check out our

Blog, https://alittle-sunshine.com/, we will take requests for DIY anything.

 XO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Easy-peasy DIY Christmas Present

This year I have decided I am going to try a DIY Christmas gift for all the important women in my life. I got on Pinterest and found some great idea’s. I found some recipes for Bath salts and bath bombs and knew this is something most women enjoy. I then started throwing ingredients together> 🙂

Today i’m sharing with you my homemade peppermint bath soak 

I didn’t follow some of the steps exactly as listed on Pinterest, but instead made it my own and twisted it up a bit. Pretty much mixed all the ingredients together and waallaaaa 🙂 

 

Peppermint Bath Soak

 

Here is what you need-

  • 1 1/2 cup of Coarse Sea Salt
  • 3/4 cup of Epsom Salt
  • 1/4 cup of Baking Soda
  • A few drops of peppermint essential oil. 
  • Food coloring if you want to add color to the bath salts. (I added pink powder coloring)
  • A jar or container to store the bath saltsIMG_0905.jpg

The first most important thing seen when entering a home.

An entry way is a very important part of any home. You want your entry way to be beautiful, inviting, and comforting all at the same time. I am going to share with you my decorated entry way along with some of my favorite idea’s every entry way should have.

IMG_9895.jpg

This is the entry way to my home. My mother made the “FAMILY” sign with wood scraps and painted on them. She also made the wood sign hanging from the shelf for the total solar eclipse that was seen perfect from our house here in Kentucky.

I dried out flowers to put in my old milk jug. After the flowers were hung upside down and dried I then sprayed them with hairspray to keep them in place and not crumble. I also used sticks that I had the boys hunt for in our backyard.

Every entry way should have a table. These are some table ideas I found on pinterest that I absolutely love! For my table I actually had to place the wood on the top which I purchased from Lowe’s. Lowe’s cut the wood in the measurement I needed. I  then stained it and placed it on top of the table.

IMG_0815.jpg

I added a curtain in the front of my coat closet and tied the curtain with burlap.

I have also added some Christmas decor. As you see I didn’t go to an extreme with the Christmas spirit. I tried to keep the same idea going with the country decor.

IMG_0816.jpg